PTFE Spritzenvorsatzfilter

Recommended for HPLC and GC samples, sterilisation and clarification of most solvents and filtration of gases and for air venting. 

 

  • Polytetrafluorethylene (PTFE, Teflon)- Membrane, hydrophobic
  • Very high flow rate
  • High chmical ressitance to most solvents and acids
  • low hold up volume
  • Free from wetting agents
  • They must be pre-wetted with a polar solvent such as ethanol or isopropanol before filtering aqueous samples 
  • Pore size 0.2 and 0.45 μm.
  • Membrane diameters 13 mm, 25 mm und 30 mm.

 

 

 

Technical Data:

Filter material: PTFE

Membrane diameter 13 mm 25 mm 30 mm
Housing material Polypropylene Polypropylene Polypropylene
Fitting inlet Female Luer-Lock Female Luer-Lock Female Luer-Lock
Fitting outlet Male Luer-Slip Male Luer-Slip Male Luer-Slip
Filter area (cm²) 1.09 4,08 5.39
Sample volume (ml) 1-10 10-100 > 100
Hold um volume (μl) < 25 < 100 < 200
Max. pressure (bar) 6 6 6
Max. operating Temperature (ºC) 50 50 50
Method of sterilisation gamma-irradiation gamma-irradiation gamma-irradiation
Part number Diameter Quantity per box    
Type: PTFE 0.2 μm, non-sterile        
SPT02013100 13 mm 100 pieces    
SPT02025100 25 mm 100 pieces    
         
         
Type: PTFE 0.45 μm, non-sterile        
SPT04515100 13 mm 100 pieces    
SPT04525100 25 mm 100 pieces    
SPT04525500 25 mm 500 pieces    
         

 

Other pore sizes, diameters, design and pack sizes are available on request.

back to overview